| |
|
|
 |
Acorn Lug Nut (Chrome)
Model: 140078-1 |
 |
|
Aluminum Beadlocked Wheels 17 inch
Model: 142000-1-K
These wheels look great and come at an affordable price! Creeper Locks are 17" X 9" wheels with a backspacing of 3.75" and are made from a solid piece of aluminum. Each wheel weighs a whopping 45 lbs with locking ring and hardware.
These are no ordinary aluminum wheel, Creeper Locks are super tough and built to last. Each wheel is cast with the inner beadlock as part of the wheel. All 24 of the bolt holes on the wheel have steel Time-Serts installed to prevent the bolts from galling. Drop down inner lip centers tire on to wheel during mounting.
Features:
|
|
|
Chrome Valve Stem
Model: 184001
|
|
|
Flip Socket 19/21mm
Model: 170003
For installing wheels and spacers this is the right tool for the job. 17mm on one end and 19mm" on the other. Thin wall design fits better than standard sockets. This socket is rated for use with an impact gun. 1/2" drive.
|
|
|
High Temp Valve Core
Model: 184002
|
|
|
Low Pressure Pencil Gauge
Model: 170504
Pressure Gauge, 0-20 PSI
|
|
|
Lug Nut (Open)
Model: 140080-1
Replacement nuts are available in both open style and closed acorn style. M12 X 1.50 threads.
Wheel studs are for rear axle application.
|
|
|
Rear Axle Wheel Stud
Model: 140079-1
Replacement nuts are available in both open style and closed acorn style. M12 X 1.50 threads.
Wheel studs are for rear axle application.
|
|
|
Rubber Valve Stem
Model: 184000
|
|
|
SNR IFS Hub Spacer Kit
Model: SNR-01
This spacer allows you to run IFS wheel hubs on a solid axle front end. IFS wheel hubs wheel mounting face is offset further to allow the front ends of these trucks to match up to the rear, which is 58 inch's wide.
A pair of these CNC machined spacers is needed to adapt either your
current solid axle rotors and calipers, or the upgraded IFS V6 calipers and
FJ-60 series vented rotors.
We supply all needed hardware to bolt this spacer to the rotor. Dowel pins are no longer used as the adapter has a pair of dowels machined into it, to use factory holes in the disc. The kit includes 12 bolts to mount the 2 discs, and is yellow zinc plated for corrosion protection.
|
NZ$510.00
 |
|
Toyota Aluminum Wheel Spacers 1.00 inch, 6 x 5.5, Pair
Model: 140001-1-kit
These bolt on wheel spacers are designed to give you a little more width without changing out your axle for a wider one. Great for use on solid axles conversions to make the front axle similar in width the wider rear axle found on 86 and up Toyota trucks. Bolt pattern is 6 stud on a 5.5" round circle.
Features safety graded studs and matching nuts for proper fit. Made from Billet 6061-T6 aluminum. Grade 8 Studs, Grade 10.9 nuts.
Five sizes available. Shipped as a set of 2 spacers w/nuts. Every spacer features a precision machined surface. Only high quality nuts and studs that are hardness graded and stamped are used. Six lug wheel spacers fit Toyota Pickups, 4Runners, FJ-40, FJ-60 & FJ80
|
NZ$146.00
|
|
Toyota Aluminum Wheel Spacers 1.25 inch, 6 x 5.5, Pair
Model: 140002-1-kit
Description as per 1" spacers above
|
|
|
Toyota Aluminum Wheel Spacers 1.50 inch, 6 x 5.5, Pair
Model: 140003-1-kit
Description as per 1" spacers above
|
NZ$180.00
|
|
Toyota Aluminum Wheel Spacers 2.00 inch, 6 x 5.5, Pair
Model: 140004-1-kit
Description as per 1" spacers above
|
|
|
Toyota Aluminum Wheel Spacers 3.00 inch, 6 x 5.5, Pair
Model: 140005-1-kit
Description as per 1" spacers above
|
|
|
Tyre Plug Kit
Model: 180005
Great for fixing tires quickly on the trail. Kit includes heavy duty T-handle insert tool, heavy duty rasp, 25 8" long plug strips, lubrication, 2 replacement tool ends and handy storage case.
|
|
|
Valve Core Tool with Plastic Handle
Model: 170502
Valve Core Remover, Standard
|
|
|
Valve Core Tool, Mini Key Ring Type
Model: 170503
Valve Core Remover on a keyring
|
|
|
Water Fill Valve
Model: 170501
Many competitors put water in their tires to lower the center of gravity of their trucks. This makes the trucks more stable and less likely to roll off the course.
|
|
