| |
|
|
 |
Ring & Pinion Set 4cyl 4.88
Model: 141060-1
On Toyota trucks we
recommend 4.88's for 33" tires and 5.29 for 35"
and larger.
|
 |
|
Ring & Pinion Set 4cyl 5.29
Model: 140135-1
As above
|
|
|
Ring & Pinion Set V6 5.29
Model: 140136-1
As above
|
NZ$472.00
 |
|
Ring & Pinion Set, High Pinion 4.88 Trail Creeper
Model: 140029-1
As above
|
|
|
Ring & pinion Set - V6 4.88 Trail Creeper
Model: 140161-1
As above.
|
NZ$472.00
|
|
Solid Pinion Spacer 4 Cyl
Model: 140059-1-KIT
Solid
pinion spacers prevent loosening of the gear setup
preload. Originally designed for older Toyota
applications, Toyota stopped using them decades ago.
Solid spacer and shims replace the crush sleeve. It
takes a little longer to set up but you won't have to
keep retorque the pinion nut down the road.
|
NZ$45.00
|
|
Solid Pinion Spacer - V6 & High Pinion
Model: 140060-1-KIT
Solid
pinion spacers prevent loosening of the gear setup
preload. Originally designed for older Toyota
applications, Toyota stopped using them decades ago.
Solid spacer and shims replace the crush sleeve. It
takes a little longer to set up but you won't have to
keep retorque the pinion nut down the road.
|
|
|
Magnetic Drain Plug with Steel washer
Model: 140032-1-K
Magnetic Drain Plugs are a great way of keeping metal from building up in the oil. Low profile design uses recessed 10mm Allen Socket. Your choice of Aluminium or Steel washers. Aluminium washers are designed for transfer cases, and Aluminium Transmissions (G, W° & R Series). Steel washers are desgined for axle housings and Steel transmissions (L Series).
|
NZ$24.00
|
|
Magnetic Drain Plug with Aluminium washer
Model: 140033-1-K
Magnetic Drain Plugs are a great way of keeping metal from building up in the oil. Low profile design uses recessed 10mm Allen socket. Your choice of Aluminium or Steel washers. Aluminium washers are designed for transfer cases and aluminium transmissions (G, W° & R series). Steel washers are desgined for axle housings and steel transmissions (L Series).
|
NZ$24.00
|
|
Differential Setup Kits 4Cyl
Model: 140031-1
Our differential setup kits feature factory Toyota bearings for lasting quality. Kits include bearings, shims, marking paint, and seals.
|
|
|
Differential Setup Kit V6 & High Pinion
Model: 140032-1
As above
|
|
|
Pinion Nut / Output Shaft Nut
Model: 140075-1
Stock
replacement nut. Fits diff or transfer case.
|
|
|
Creeper Breather - Differential Breather Kit
Model: 140207-1-K
Prevents dirt, debris and water from getting in to your axle through the stock axle housing breather. Expands and contracts to accommodate increase or decrease in housing pressure. Kit includes one housing fitting, clamp and bellows (as shown). Easy installation takes just a few minutes. No hoses to route. Fits all Toyota Pickup/4 Runner solid axle housings (front or rear).
Note: This product is not compatible with the Trail-Gear Rear Axle 4 link Upper Link Mount kit.
|
|
