These steel braided brake lines are 26" long and are DOT approved. Front lines use factory mounting clips so there is no need to modify the factory clips in any way.
Specifications:

• Size 3/16"
• Operating Pressure PSI 1,750
• Burst Pressure PSI : 7,000
• Bend Radius 2.0"
• Fits 79-95 Pickup & 4Runner
• Fits Suzuki Samurai's w/Toyota axles.

For Samurai's with Toyota axles use front (Female to Female) lines for both front and rear. Two lines are required for front. On line is required for 88 1/2 and later Samurai's. Two rear lines are required for 88 and older Samurai's.

NOTE: May not be certifiable for Road Use.  Please check with your Certifier.

Use this bracket kit to convert your Hilux or Cruiser to four wheel discs using Toyota MR2 non turbo rear calipers. Mounting bracket is cadmium plated for corrosion resistance, and the spacers are stainless steel. Kit includes 2 brackets and 4 spacers.

NOTE: Uses 78 series Prado Rear Discs

1986 and later Surfs and HiLuxes feature larger vented rotors from the factory. Earlier 1979-1985 trucks used solid (non vented) rotors up front along with smaller calipers. If your installing a solid front axle on an 86 and later rig you will want to install a set of these vented rotors onto the axle. With these rotors you will be able use your existing larger IFS calipers. Simply unbolt your existing rotors and replace them with these vented rotors. Slight grinding of the rotors backing plate will be needed. Then simply install the IFS calipers right on to the solid axle using the factory bolts.

These rotors can also be used on 85 and older trucks to increase braking effectiveness. Fits 81-85 Solid axles with 8 hole style rotors.